Efficient compactor for charcoal briquetting

Kompaktor HK from Hosokawa alpine was made to compress charcoal powder into briquettes.

Mechanical spring assemblies provide for the elasticity of the swing arm which protrudes due to its light construction. This leads to a very good price-performance ratio for this application.

Hosokawa manufacturers the roller mill for charcoal in two different executions: HK 150 and HK 200, with a roller diameter of 400 and a throughput in of 1 and 2.5 t/h respectively.

The post Hengeres malom faszénbriketthez appeared first on Holimex Hungary.

Compact mills for sharp-edged granules

The high-pressure roller mill from Hosokawa Alpine is also called roller crusher or roller press. In comparison to compaction processes, it uses lower press forces between the rollers because no new adhesive forces need to be created.

With high-pressure roller mills products are produced with a precipitous granule distribution.

Because only the outer particles of the material bed have contact with the surface of the rollers, milling that is almost contamination-free is possible.

Often used in the cases of medium-fine crushing of hard materials such as ceramics, minerals from 5 up to 9 on the MOHS hardness scale metals and metal alloys.

The post Nagynyomású hengermű appeared first on Holimex Hungary.

Small scale granulation with effortless product changes

The Kompaktor® CS 25 from Hosokawa Alpine is particularly suited for the laboratory and for small product amounts. Where you will be able of processing powder to get granulate or briquettes. This process is described as compaction or briquetting.

This Laboratory roller compactor is made for frequent product changes and abrasive products because the rollers can be easily replaced. Due to the cantilever bearing the Kompaktor CS 25 is particularly easy to maintain and this with 25 tons of press force.

The post Laboratóriumi hengeres tömörítő appeared first on Holimex Hungary.

Robust briquetting of chemicals, minerals, and metals

Kompaktor MS from Hosokawa Alpine is a robust device used to compress powder to granulate or briquettes. Due to high press forces, the machine base unit is made from carbon steel. Briquetting of chemicals and minerals/metals are the strong points of the Kompaktor MS: production of briquettes out of sponge iron, magnesium oxide, burnt lime, and many other products; dry granulation of salts, NPK fertilizers, torrefied biomasses, charcoal, and many more.

Roll diameters ranging from 300 mm up to 1110 mm cover a broad range of different throughput capacities (0.5– 120 t/h). Several vertical feed screws provide for an ideal product distribution over the roll width at high throughputs. This guarantees a homogenous compression density. Dual gear reducer providing for exactly matching circumferential speed of the rolls.

The post Hengeres tömörítő appeared first on Holimex Hungary.